Of course, we all want a secure home. By this we mean, among other things, that your home is not an easy target for a home burglary. It is one of the tasks of a locksmith to make this happen for you. We therefore also see it as our responsibility to point out to you that many homes are not as well protected against home burglaries as people think. This is due to the introduction of a new burglary method a few years ago that is becoming more common. Pulling a key enables burglars to open locks that are not secured against it. With the installation of anti-torque hardware, the locksmith can ensure a safe home again.
BURGLARS CAN PICK YOUR LOCK IN SECONDS
With the key pulling burglary method, burglars can get your lock open in seconds. This is obviously something that you want to avoid because this way it is very tempting for them to choose your very home for their nefarious plans. What the burglars do when they pull the key is screw a screw into the cylinder of your lock. Then they use special pliers to pull the core out of the lock. The bolt that locks the door can then be opened in a very simple way. If your locks are not yet secured against tapping, this can be solved by placing anti-coring hardware.
MOST HOMES REQUIRE THE INSTALLATION OF ANTI-CRACKLING DEVICES
Without people realizing it, most homes still don’t have any protection against tapping. If you are not a burglar or slotenmaker den haag, you don’t know what to look for to fix this.
you need to look for to determine this. A clear indication that your home is not protected against tapping is a cylinder sticking out of the door, giving burglars free access to it. Installing an anti-torque hardware is an easy way to solve this problem. The locksmith will replace the hardware of your lock with one that can prevent the burglary method.
TIPS PRIOR TO INSTALLING ANTI-COUNTERFEIT HARDWARE
As mentioned earlier, the installation of an anti-burglary hardware adds to the security of your home. With such a hardware, it will no longer be possible to pull the cylinder out of the lock using a claw hammer or crowbar, for example. Before you get started with the installation of an anti-knock out fitting, we would like to list a few tips.
#1: Use the step-by-step plan below
To avoid unnecessary damage to the lock or the cylinder, it is strongly recommended to follow the step-by-step plan below. It explains step-by-step, how to replace the existing door hardware for an anti-burglary hardware. Besides following the step-by-step plan below, it may be worthwhile to watch a video on the internet. This will give you an idea of the work that needs to be done when replacing the anti-knockout hardware.
#2: Replace only the cylinder in the lock
When you use a cylinder lock on the door, it is not necessary to replace the entire lock. Replacing the cylinder is sufficient! This way you will save on the cost of improving the security of your home. An additional advantage is that replacing a loose cylinder in the lock is relatively easy. You do not need to enlarge the existing hole for the lock in the door, for example, if you only replace the lock cylinder.
#3: Choose an SKG-certified hardware.
Our locksmiths strongly recommend that you choose a certified anti-kickback hardware. The SKG is an independent foundation that inspects locks and cylinders for the resistance they offer to burglars. The most common burglary methods are examined. Core pulling is an example of this, as well as lockpicking and the knock-key method. SKG gives the anti-key pulling hardware a rating of one to a maximum of three stars. A locksmith can provide you with advice if you are unsure of the anti-keyring hardware that is most suitable for you.
#4: Take into account the PC size
When purchasing a new anti-keyring hardware, pay attention to its PC size. The PC size of the door hardware should match that of the lock. Should there be a difference in the PC-size, it will not be possible to fit the new hardware.
#5: Pay attention to the width of the door fitting.
Similar to assessing the PC size of the lock, is measuring the width of the door hardware. The anti-crush hardware should not be too wide, to prevent it from falling out of the door. Before purchasing the door hardware, first measure the space between the lock and the edge of the door. Often a door fitting has a width of 50 mm.
The post How to put a good lock on your door in 2021 appeared first on Evertise.
