{"id":249835,"date":"2026-08-24T11:04:28","date_gmt":"2026-08-24T11:04:28","guid":{"rendered":"https:\/\/businesnewswire.com\/?p=216313"},"modified":"2026-08-24T11:04:28","modified_gmt":"2026-08-24T11:04:28","slug":"a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces","status":"publish","type":"post","link":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/","title":{"rendered":"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces"},"content":{"rendered":"

Concrete is strong, but an outdoor slab is not untouched by everyday use or exposure. Driveways deal with vehicles, patios collect dirt and spills, and walkways face constant foot traffic. Water can enter small pores in the surface, stains can become harder to remove, and minor wear may become more noticeable with time. Keeping concrete in good condition starts with recognizing these changes before they turn into larger repair problems.<\/span><\/p>\n

For homeowners researching <\/span>concrete sealing<\/b>, companies such as <\/span>Everseal<\/b> may come up while comparing ways to protect outdoor surfaces. A sealer can help limit how easily water and certain contaminants enter the concrete, but it cannot repair structural damage or make an aging slab permanently maintenance-free. Good results depend on the condition of the surface, careful preparation, the right product, and proper application.<\/span><\/p>\n

Knowing what to check before sealing can prevent wasted time and a disappointing finish.<\/span><\/p>\n

What Happens to Outdoor Concrete Over Time?<\/b><\/h2>\n

Concrete has a hard appearance, but its surface contains pores that can absorb moisture and other materials.<\/span><\/p>\n

Rainwater, irrigation, mud, oil, leaves, food spills, and normal outdoor debris can all affect concrete. A driveway may collect vehicle fluids and tire marks, while a patio may develop discoloration beneath planters, furniture, or cooking areas.<\/span><\/p>\n

Small cracks can also appear as concrete ages. Some remain minor, while others may widen or signal movement beneath the slab.<\/span><\/p>\n

Surface wear is another common issue. High-traffic areas may become rougher or look different from protected sections. Decorative concrete can lose some of its original appearance as the top layer experiences repeated exposure.<\/span><\/p>\n

A sealer can reduce certain types of surface exposure, but the existing condition should always be checked first.<\/span><\/p>\n

What Does a Concrete Sealer Actually Do?<\/b><\/h2>\n

Concrete sealers are made to create a level of protection between the surface and its surroundings. The exact performance depends on the product.<\/span><\/p>\n

Some sealers penetrate into the concrete and are designed to reduce water absorption without creating a noticeable surface film. Others form a coating that may change the sheen or deepen the appearance of decorative concrete.<\/span><\/p>\n

The right choice depends on where the concrete is located and how the homeowner wants it to look.<\/span><\/p>\n

A sealer may help make some spills easier to clean and reduce the amount of moisture entering the surface. It may also help preserve certain decorative finishes.<\/span><\/p>\n

What it cannot do is correct serious cracking, settlement, crumbling, or poor drainage. Those conditions need to be addressed separately.<\/span><\/p>\n

Signs That a Concrete Surface Needs Attention<\/b><\/h2>\n

You do not need to wait until a slab looks badly worn before inspecting it.<\/span><\/p>\n

Several changes are worth watching.<\/span><\/p>\n

Water Darkens the Surface Quickly<\/b><\/h3>\n

If clean water immediately darkens the concrete and absorbs into it, the surface may have little resistance to moisture.<\/span><\/p>\n

This does not automatically mean that sealing is required, but it can show that the concrete is readily absorbing water.<\/span><\/p>\n

Stains Are Becoming More Noticeable<\/b><\/h3>\n

Oil, food, rust, leaves, or other materials can leave marks on porous concrete.<\/span><\/p>\n

Fresh stains are often easier to deal with than old ones, so repeated discoloration may be a reason to review the condition of the surface.<\/span><\/p>\n

A Previous Finish Looks Uneven<\/b><\/h3>\n

Some sealed surfaces eventually show dull sections, worn traffic paths, or areas with different levels of sheen.<\/span><\/p>\n

Uneven appearance does not always mean another coat should be applied immediately. The old coating must first be identified and checked for compatibility with any new product.<\/span><\/p>\n

The Surface Has Small Cracks or Damage<\/b><\/h3>\n

Inspect cracks before sealing.<\/span><\/p>\n

A narrow surface crack may require a different response from a widening crack, sunken slab, broken edge, or area that is crumbling. Sealing over significant damage only hides part of the problem temporarily.<\/span><\/p>\n

Start With a Careful Surface Inspection<\/b><\/h2>\n

Before planning concrete sealing, a contractor such as <\/span>Everseal<\/span><\/a> should evaluate the actual condition of the slab instead of treating every driveway or patio the same way. Homeowners taking on the project themselves should do the same.<\/span><\/p>\n

Walk across the entire area and look for cracks, loose material, stains, old coatings, drainage problems, and sections that remain damp.<\/span><\/p>\n

Pay attention to edges and joints. These areas can collect debris and may reveal movement that is harder to notice in the middle of a large slab.<\/span><\/p>\n

If water regularly pools in one area, determine why. A coating will not correct the slope of the concrete or solve a drainage problem around the property.<\/span><\/p>\n

Any necessary repairs should be handled before the final surface preparation begins.<\/span><\/p>\n

Choose the Sealer Based on the Surface<\/b><\/h2>\n

Not all sealers create the same result.<\/span><\/p>\n

Penetrating Sealers<\/b><\/h3>\n

Penetrating products enter the pores of the concrete rather than leaving a thick visible layer on top.<\/span><\/p>\n

They are often chosen when a homeowner wants protection with little change to the natural appearance. The finished surface may look similar to untreated concrete, depending on the product.<\/span><\/p>\n

Film-Forming Sealers<\/b><\/h3>\n

Film-forming products create a coating on the surface.<\/span><\/p>\n

Some can give decorative concrete a richer color or a noticeable sheen. Depending on the formulation, finishes may range from relatively subtle to glossy.<\/span><\/p>\n

These products need careful application because uneven coating thickness can be visible.<\/span><\/p>\n

Consider Slip Resistance<\/b><\/h3>\n

A glossy finish may look attractive, but appearance is not the only consideration.<\/span><\/p>\n

Patios, pool surroundings, steps, and other walking surfaces can become wet. The suitability of a particular sealer for foot traffic and wet conditions should be checked before application.<\/span><\/p>\n

Read the manufacturer’s instructions and safety information rather than choosing a product based only on its finished look.<\/span><\/p>\n

Cleaning Comes Before Sealing<\/b><\/h2>\n

Putting sealer over a dirty slab can trap stains and debris beneath the finish.<\/span><\/p>\n

Begin by sweeping or blowing away loose dirt. Remove leaves from joints, clear soil from edges, and move furniture, planters, vehicles, and other items away from the work area.<\/span><\/p>\n

The surface may then need washing or a suitable concrete cleaner, depending on its condition.<\/span><\/p>\n

Oil stains often require different treatment from ordinary dirt. Rust, organic stains, and remnants of previous coatings may also need specific cleaning methods.<\/span><\/p>\n

Avoid mixing cleaning chemicals unless the manufacturers clearly state that doing so is safe.<\/span><\/p>\n

After cleaning, rinse as required and inspect the surface again. Sealing should not be used as a shortcut for stains that could have been removed during preparation.<\/span><\/p>\n

Let the Concrete Dry Properly<\/b><\/h2>\n

One of the easiest mistakes to make is sealing before the slab has dried enough.<\/span><\/p>\n

Concrete can retain moisture even after the surface no longer looks wet. Shaded areas, joints, cracks, and sections near landscaping may dry more slowly.<\/span><\/p>\n

The required drying conditions depend on the sealer, recent weather, temperature, humidity, and the amount of water used during cleaning.<\/span><\/p>\n

Check the product instructions rather than relying on a fixed waiting period.<\/span><\/p>\n

Applying a product over a surface that contains too much moisture can affect adhesion, appearance, or curing.<\/span><\/p>\n

Watch the Weather Before Starting<\/b><\/h2>\n

Outdoor application needs a suitable weather window.<\/span><\/p>\n

Rain can interfere with freshly applied material. Strong heat may cause some products to dry too quickly, while cool or humid conditions can slow curing.<\/span><\/p>\n

The temperature of the concrete itself also matters. A driveway sitting in direct afternoon sun can become much hotter than the surrounding air.<\/span><\/p>\n

Manufacturers normally provide an acceptable temperature range and guidance about moisture or rain exposure. Those directions should guide the timing of the project.<\/span><\/p>\n

If conditions are questionable, delaying the work is usually better than trying to force the application into a poor weather window.<\/span><\/p>\n

Apply the Product Evenly<\/b><\/h2>\n

Different products may call for rollers, brushes, sprayers, or other application tools.<\/span><\/p>\n

Follow the instructions for the specific sealer, including recommendations for coverage and the number of coats.<\/span><\/p>\n

Applying more material than recommended does not necessarily create better protection. Excess product can lead to uneven appearance, slow drying, bubbles, or other finish problems.<\/span><\/p>\n

Large surfaces are easier to manage when divided into logical working sections.<\/span><\/p>\n

Edges, corners, control joints, and areas near walls may require more careful application than open parts of a driveway or patio.<\/span><\/p>\n

During <\/span>concrete sealing<\/b>, consistency matters. Homeowners working with <\/span>Everseal<\/b> or another professional can ask how the surface will be prepared, which product will be used, and how application will be handled around joints and high-traffic areas.<\/span><\/p>\n

Avoid Common Sealing Mistakes<\/b><\/h2>\n

Several problems can be avoided with careful preparation.<\/span><\/p>\n

Sealing Over Stains<\/b><\/h3>\n

A sealer may make existing discoloration more noticeable rather than hiding it.<\/span><\/p>\n

Ignoring Old Coatings<\/b><\/h3>\n

A previous sealer can affect how a new product bonds. Compatibility should be checked before applying another layer.<\/span><\/p>\n

Applying Too Much Material<\/b><\/h3>\n

Heavy application can create a finish that looks uneven or takes longer to cure.<\/span><\/p>\n

Working on Damp Concrete<\/b><\/h3>\n

Moisture beneath the coating may interfere with the finished result.<\/span><\/p>\n

Using the Surface Too Soon<\/b><\/h3>\n

Vehicles, furniture, and foot traffic should stay off the area for the period listed by the manufacturer.<\/span><\/p>\n

Moving items back too early can leave marks or interfere with curing.<\/span><\/p>\n

Keep the Surface Clean Afterward<\/b><\/h2>\n

Sealed concrete still needs routine care.<\/span><\/p>\n

Sweep away dirt and leaves instead of allowing debris to sit on the surface for long periods. Clean spills reasonably soon, especially on driveways and outdoor cooking areas.<\/span><\/p>\n

Avoid assuming that every strong cleaner is suitable for a sealed surface. Harsh chemicals may affect some coatings.<\/span><\/p>\n

Use cleaning products and methods that are compatible with the sealer.<\/span><\/p>\n

Also check drainage around the slab. Repeated pooling can place unnecessary stress on both the surface and the surrounding joints.<\/span><\/p>\n

Do Not Reseal Only Because a Certain Amount of Time Has Passed<\/b><\/h2>\n

There is no single schedule that suits every concrete surface.<\/span><\/p>\n

A heavily used driveway may wear differently from a covered patio. Sun exposure, traffic, weather, cleaning habits, and the type of sealer all affect how the surface ages.<\/span><\/p>\n

Inspect the concrete rather than relying only on a calendar.<\/span><\/p>\n

Changes in sheen, increased water absorption, worn traffic areas, or deterioration of an old coating may indicate that the surface needs attention.<\/span><\/p>\n

Before adding another coat, confirm that the existing material is compatible and that the concrete has been cleaned and prepared correctly.<\/span><\/p>\n

Know When Repairs Should Take Priority<\/b><\/h2>\n

Sealing is a maintenance step, not a structural repair.<\/span><\/p>\n

If the slab is sinking, moving, badly cracked, flaking, or breaking apart, determine the cause before coating it.<\/span><\/p>\n

The same applies to ongoing drainage problems. Water that repeatedly collects around the concrete can continue causing trouble regardless of the finish placed on top.<\/span><\/p>\n

A professional assessment may be useful when the damage is widespread or the condition of an old coating is unclear.<\/span><\/p>\n

Protect Concrete With the Right Preparation<\/b><\/h2>\n

A successful sealing project begins before the container is opened.<\/span><\/p>\n

The surface needs to be inspected, repaired where necessary, cleaned thoroughly, and allowed to dry. The chosen product should suit the type of concrete, expected traffic, desired appearance, and conditions where it will be used.<\/span><\/p>\n

Homeowners should also keep expectations realistic. A sealer can reduce exposure and make maintenance easier in some situations, but concrete still needs cleaning, inspection, and occasional repair.<\/span><\/p>\n

Paying attention to stains, moisture, cracks, worn areas, and drainage gives homeowners a clearer picture of what the surface actually needs. That approach protects the concrete without covering up problems that deserve a different solution.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Concrete is strong, but an outdoor slab is not untouched by everyday use or exposure. Driveways deal with vehicles, patios collect dirt and spills, and walkways face constant foot traffic. Water can enter small pores in the surface, stains can become harder to remove, and minor wear may become more noticeable with time. Keeping concrete… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":344,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[374],"tags":[],"class_list":["post-249835","post","type-post","status-publish","format-standard","hentry","category-ipsnews"],"yoast_head":"\nA Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business\" \/>\n<meta property=\"og:description\" content=\"Concrete is strong, but an outdoor slab is not untouched by everyday use or exposure. Driveways deal with vehicles, patios collect dirt and spills, and walkways face constant foot traffic. Water can enter small pores in the surface, stains can become harder to remove, and minor wear may become more noticeable with time. Keeping concrete... Continue Reading →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/\" \/>\n<meta property=\"og:site_name\" content=\"Business\" \/>\n<meta property=\"article:published_time\" content=\"2026-08-24T11:04:28+00:00\" \/>\n<meta name=\"author\" content=\"Busines Newswire\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Busines Newswire\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/\",\"url\":\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/\",\"name\":\"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business\",\"isPartOf\":{\"@id\":\"https:\/\/ipsnews.net\/business\/#website\"},\"datePublished\":\"2026-08-24T11:04:28+00:00\",\"author\":{\"@id\":\"https:\/\/ipsnews.net\/business\/#\/schema\/person\/457ba41b64cc345c2ab68ac8092bd5e8\"},\"breadcrumb\":{\"@id\":\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/ipsnews.net\/business\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/ipsnews.net\/business\/#website\",\"url\":\"https:\/\/ipsnews.net\/business\/\",\"name\":\"Business\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/ipsnews.net\/business\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/ipsnews.net\/business\/#\/schema\/person\/457ba41b64cc345c2ab68ac8092bd5e8\",\"name\":\"Busines Newswire\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/ipsnews.net\/business\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/1b21e185e011dc25167b5d0f8e948087219de9c5efa4828a2ee7e511b602d98d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/1b21e185e011dc25167b5d0f8e948087219de9c5efa4828a2ee7e511b602d98d?s=96&d=mm&r=g\",\"caption\":\"Busines Newswire\"},\"sameAs\":[\"https:\/\/businesnewswire.com\"],\"url\":\"https:\/\/ipsnews.net\/business\/author\/busines-newswire\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/","og_locale":"en_US","og_type":"article","og_title":"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business","og_description":"Concrete is strong, but an outdoor slab is not untouched by everyday use or exposure. Driveways deal with vehicles, patios collect dirt and spills, and walkways face constant foot traffic. Water can enter small pores in the surface, stains can become harder to remove, and minor wear may become more noticeable with time. Keeping concrete... Continue Reading →","og_url":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/","og_site_name":"Business","article_published_time":"2026-08-24T11:04:28+00:00","author":"Busines Newswire","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Busines Newswire","Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/","url":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/","name":"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces - Business","isPartOf":{"@id":"https:\/\/ipsnews.net\/business\/#website"},"datePublished":"2026-08-24T11:04:28+00:00","author":{"@id":"https:\/\/ipsnews.net\/business\/#\/schema\/person\/457ba41b64cc345c2ab68ac8092bd5e8"},"breadcrumb":{"@id":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/ipsnews.net\/business\/2026\/08\/24\/a-complete-guide-to-protecting-patios-driveways-and-other-concrete-surfaces\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/ipsnews.net\/business\/"},{"@type":"ListItem","position":2,"name":"A Complete Guide to Protecting Patios, Driveways, and Other Concrete Surfaces"}]},{"@type":"WebSite","@id":"https:\/\/ipsnews.net\/business\/#website","url":"https:\/\/ipsnews.net\/business\/","name":"Business","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/ipsnews.net\/business\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/ipsnews.net\/business\/#\/schema\/person\/457ba41b64cc345c2ab68ac8092bd5e8","name":"Busines Newswire","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/ipsnews.net\/business\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/1b21e185e011dc25167b5d0f8e948087219de9c5efa4828a2ee7e511b602d98d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/1b21e185e011dc25167b5d0f8e948087219de9c5efa4828a2ee7e511b602d98d?s=96&d=mm&r=g","caption":"Busines Newswire"},"sameAs":["https:\/\/businesnewswire.com"],"url":"https:\/\/ipsnews.net\/business\/author\/busines-newswire\/"}]}},"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/posts\/249835","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/users\/344"}],"replies":[{"embeddable":true,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/comments?post=249835"}],"version-history":[{"count":1,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/posts\/249835\/revisions"}],"predecessor-version":[{"id":249836,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/posts\/249835\/revisions\/249836"}],"wp:attachment":[{"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/media?parent=249835"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/categories?post=249835"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ipsnews.net\/business\/wp-json\/wp\/v2\/tags?post=249835"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}