{"id":236042,"date":"2025-09-27T07:37:45","date_gmt":"2025-09-27T07:37:45","guid":{"rendered":"https:\/\/businesnewswire.com\/?p=134543"},"modified":"2025-09-27T07:37:45","modified_gmt":"2025-09-27T07:37:45","slug":"bunk-beds-keeping-them-safe-and-stable-in-daily-use","status":"publish","type":"post","link":"https:\/\/ipsnews.net\/business\/2025\/09\/27\/bunk-beds-keeping-them-safe-and-stable-in-daily-use\/","title":{"rendered":"Bunk beds: Keeping them safe and stable in daily use"},"content":{"rendered":"

In holiday parks, group lodges, and big families, <\/span>stapelbedden<\/span><\/a> are a favourite way to save space. Two, sometimes even three sleepers, can share the footprint of a single bed\u00a0 a smart solution when square metres are limited. But the weight load and the height also bring special safety challenges. As an owner, manager, or parent you want to be sure every sleeper child or adult\u00a0 can climb, turn, and rest without risk of frames sagging or falls from the top bunk.<\/span><\/p>\n

Solid construction comes first<\/span><\/h2>\n

A safe bunk bed starts with a strong frame. Bremafa builds beds in solid beech or powder-coated steel. Beech is hard, splinter-free, and less likely to warp in humid conditions. In coastal hostels or other damp settings, epoxy-coated steel is the better choice: high load capacity and rust resistance. Pay attention to corner joints. Dovetail joints or welded plates prevent the frame from pulling out of square. Also check how the slats are supported: ideally on an in-grooved rail or steel U-profile, not just screws. That way the weight is spread and sagging is avoided.<\/span><\/p>\n

\"\"<\/p>\n

Choosing the right mattress<\/span><\/h2>\n

A thin foam mattress may look light, but for adults it makes the slats noticeable. Bremafa advises cold foam HR mattresses at least 14 cm thick with a density of 40 kg\/m\u00b3. For heavy use in hostels, a pocket spring core works well: more airflow, less sagging. Important: the mattress must never be higher than the guard rail. Otherwise, a sleeper might roll over it in their sleep. On modern bunk beds the max height is usually 17 cm enough for comfort, still safe.<\/span><\/p>\n

Safety standards and certificates<\/span><\/h2>\n

Dutch law follows European norm EN 747 for bunk beds. It sets rules like: guard rails at least 16 cm above the mattress, slat openings no wider than 7.5 cm, and non-slip steps on ladders. Bremafa supplies every frame with a test report: drop test (60 kg falling weight), side stability test, and trap analysis. Keep that certificate ready for inspections, because insurers increasingly ask for it.<\/span><\/p>\n

Think beyond the bed itself<\/span><\/h2>\n

A good bunk is only safe if the surroundings are smart too. Check regularly that nightstands or luggage racks aren\u2019t pressing against the frame\u00a0 this can cause rubbing, squeaks, or stress on the joints. A simple floor plan for housekeeping helps: when furniture gets moved, staff can put it back without blocking the ladder or escape route.<\/span><\/p>\n

Feedback as an early warning<\/span><\/h2>\n

Place a discreet QR code on the inside of the ladder and invite guests to report issues. Comments about creaks, slippery steps, or loose slats will reach you while problems are still small. Then you can fix things quickly replace a cap, roughen a step, or tighten a screw. Proactive maintenance saves repair cost and keeps guest ratings high.<\/span><\/p>\n

Ladder design and climbing comfort<\/span><\/h2>\n

A slanted ladder is easier to climb but takes more space. A straight ladder saves floor area, provided steps are deep enough (25 mm or more) and anti-slip. For daily use, choose a ladder that hooks securely into metal brackets\u00a0 it won\u2019t slide while someone is climbing. For younger children, integrated side panels with cut-outs are safer. They give more grip and prevent toys getting stuck between rungs.<\/span><\/p>\n

\"\"<\/p>\n

Ventilation and hygiene<\/span><\/h2>\n

Two sleepers stacked means double the moisture. Always use open slat bases. Solid MDF panels may look neat but block airflow. <\/span>Bremafa adds vent holes in wooden backs and mesh grills in steel models<\/span><\/a>. Combine that with a breathable polyester mattress cover: sweat escapes, dust mites struggle. Rotate mattresses at least every three months\u00a0 it extends lifespan and helps prevent mould.<\/span><\/p>\n

Maintenance checklist for long-term safety<\/span><\/h2>\n

Many accidents happen due to skipped inspections. A fixed routine is key.<\/span><\/p>\n